Description
Features & benefits
Hot, cold or ambient water, ready when you are.
HydroForm+ puts temperature-controlled RO water at the point where you fill the glass, without a source tank to refill.
Skip the kettle.
Cold, ambient and hot water up to 99°C cover drinking, brewing and cooking. HydroForm+ heats and chills at the dispense point.
RO filtration in every glass.
PAC pre-filtration improves taste and smell before water reaches the RO and activated-carbon fibre cartridge, followed by an outlet UVC stage.
See the reading and know when each filter is due.
The display keeps the live TDS reading and separate filter-life percentages beside the temperature, volume and rinse controls.
Refill at home
Hot, cold and ambient water. Fewer bottles to bring home.
HydroForm+ fills a glass, carafe or reusable bottle directly, reducing the bottled drinking water a household needs to buy, carry and store.
Refill the bottle or carafe you already have instead of reaching for another disposable one.
Cold, ambient and hot RO water are available from the same connected purifier.
A steady supply at home means fewer bottled-water cases taking up cupboard or floor space.
See it working · HydroForm+
See it working. Know when the filters are due.
HydroForm+ keeps its live TDS reading and separate filter-life percentages together on the touch display.
Better-tasting water in every glass.
PAC pre-filtration improves taste and smell before the RO/ACF cartridge and final outlet stage.
Check your RO reading.
The current TDS value stays available on the appliance display for an immediate everyday check.
Know when each filter is due.
HydroForm+ tracks the two cartridges separately and shows their remaining life by percentage.
A clean result across bacteria, toxic metals and pesticides.
SGS Malaysia tested water from HydroForm+ (HF20) across three important contaminant groups. Every reported target came back non-detect: total coliforms and E. coli; arsenic, lead and mercury; and the full listed pesticide panel. This goes well beyond a taste check or TDS reading—it is independent laboratory evidence covering microbiological and chemical water quality.
1 SGS Malaysia test report HNSA/260580406-AH86293, reported 7 May 2026. Results apply to the HydroForm+ (HF20) sample submitted for analysis. “Non-detect” means below each test method’s stated reporting limit.
Official product film & gallery
See HydroForm+ in motion.
Watch temperature-controlled dispensing and the touch interface, then compare the Carbon Black and Stellar White finishes.
Official Velta film
HydroForm+ product film
The local film demonstrates ambient, chilled and hot water, NanoPure RO filtration and the full-touch display.
HydroForm+ product views
Temperature control
Five temperature presets with finer control.
Move from 5°C chilled water to near-boiling water, with five presets and 1°C control increments across the range.
Cold
Chilled water ready for drinking.
Unheated
Filtered water without heating or cooling.
Warm
A warm-water preset for everyday use.
Hot
Hot water for tea and everyday drink preparation.
Near-boiling
The highest preset for near-boiling water on demand.
Chilled output is rated at 1.5 L/hour, while the connected instant-flow system is designed for continuous hot-water use.
Installation
Connected countertop installation.
HydroForm+ connects to a cold-water line, reject-water drain and power point, so all three routes need to work in the intended position.
From inlet to glass
Cold-water inlet
0.1–0.4 MPa operating pressure.
PAC + RO/ACF
Two composite cartridges.
Temperature + outlet
Hot, cold or ambient dispense.
RO reject water drains away automatically through a dedicated line. The installation needs a suitable route to the drain; there is no tank to empty by hand.
Footprint
180 × 425 × 380 mm body. Width is only the first measurement; allow practical rear, top and dispensing clearance.
Power
A suitable nearby point for a 220–230 V appliance with 2,100 W heating power.
Service access
The two filter positions, isolation point, tubing and ventilation need to remain reachable in daily use.
Filtration
Two composite cartridges and an outlet UV stage.
A PAC pre-filter, reverse-osmosis membrane, activated-carbon fibre and outlet UVC work together from inlet to glass.
Sediment pre-filtration
Captures suspended particles before the later filters.
Activated carbon
Carbon pre-treatment used for taste and odour-related compounds.
RO membrane
A nominal 0.0001 µm reverse-osmosis membrane handles the core dissolved-matter stage.
Post-carbon
A final activated-carbon stage after the RO membrane.
UV at outlet
A final outlet-stage function before water reaches the glass.
Display & controls
Temperature, volume and filter status.
Temperature, serving volume, filter status, TDS, child lock and rinse controls stay together on the display.
Live TDS display
Shows the appliance’s current TDS reading as part of the everyday interface.
Filter-life monitor
Shows the estimated life remaining for both cartridges.
Auto-rinse
Runs an automatic rinse after filter changes and also provides a manual rinse control.
Child lock
Helps prevent accidental hot-water dispensing. Adult supervision is still important around children.
Eco mode
Reduces unnecessary operation while the purifier is not in use.
Filters & maintenance
Two filters, tracked by the appliance.
Follow the device prompt, each cartridge’s reference capacity and the written Malaysia service plan. The two filters are tracked separately.
2,100 L reference capacity
Replace when prompted or by the agreed local service plan; actual life depends on feed water and use.
3,000 L reference capacity
Replace when prompted or by the agreed local service plan; actual life depends on feed water and use.
Request the current quote
Malaysia replacement cartridges and fixed time intervals are not published online. Confirm availability, price and ownership cost in writing.
Filtration, temperature and interface
Inside HydroForm+.
See the filters, outlet UVC stage, temperature controls, connected supply and front service access.
HydroForm+ in motion
See the internal temperature hardware, touch display and dispensing sequence in the local product film.
Two cartridges plus an outlet UV stage
PAC and RO/ACF composite cartridges filter the water before a 2.5 W UVC LED at the outlet.
A slim body, with room needed behind it
At 180 mm wide, it saves side-to-side space. Allow for 425 mm depth, dispensing, ventilation, power, inlet, drain and service.
Both filters open from the front
Open the front panel to replace either cartridge. The two filters have different reference capacities.
Connected directly to your water supply
There is no source tank to refill. It needs a cold-water inlet, drain, power point and accessible shut-off valve.
Specifications
HydroForm+ specifications.
Check the temperature settings, flow, filters, dimensions, power and connection requirements against the intended installation position.
| Water modes | Hot · cold · ambient |
|---|---|
| Temperature presets | 99°C · 85°C · 45°C · ambient · 5°C |
| Temperature range | 5–100°C · 1°C control increments |
| Water-production flow | 0.52 L/min |
| Cold output | 1.5 L/hour |
| Hot output | Continuous hot-water dispensing |
| Filter system | PAC composite + RO/ACF composite |
| Nominal RO scale | 0.0001 µm · manufacturer specification |
| PAC reference capacity | 2,100 L · manufacturer specification |
| RO + ACF reference capacity | 3,000 L · manufacturer specification |
| UV outlet | 2.5 W UVC LED |
| Water supply | Connected cold-water inlet + reject-water drain |
| Operating pressure | 0.1–0.4 MPa |
| Power supply | 220–230 V · 50/60 Hz |
| Heating / cooling | 2,100 W / 125 W |
| Dimensions (W × D × H) | 180 × 425 × 380 mm |
| Net weight | 7.3 kg |
| Materials | BPA-free ABS + metal |
| Colours | Carbon Black · Stellar White |
| Controls | TDS · filter life · auto-rinse · child lock · eco |
| Malaysia warranty | 12 months standard + 12 months extended; exclusions and assessment apply |
Installation planning
HydroForm+ in a home setting.
The intended position needs the 180 × 425 mm footprint, cold-water inlet, reject-water drain, power and service clearance.
- Inlet
- Confirm water pressure and an accessible isolation point.
- Drain
- Plan a secure reject-water route without kinks or backflow.
- Power
- Use a suitable nearby point for the 2,100 W heating load.
- Access
- Keep the front filters, tubing, ventilation and shut-off reachable.
Compare alternatives
Countertop, sparkling or under-sink.
Choose by water modes, measured space, connection routes, filters, ownership work and local service—not by the headline machine price alone.
Choose it for the simplest, lowest-cost setup.
Keep your existing setup if you are satisfied with the exact tap and a kettle.
Read the tap-water guide →Choose it to keep the counter clear.
Ambient RO and composite-filtered water from a dedicated faucet, without hot or cold dispensing.
View HydroView+ →Choose it when sparkling belongs with hot and cold.
Adds sparkling water and a refillable option, but costs more and uses 508 mm of counter depth.
View HydroSpark+ →Visible RO performance
Why every Velta purifier includes TDS monitoring.
Is your water filter working right now? Most families can hear the appliance and taste the water, but neither tells them how strongly the RO membrane is reducing dissolved material.
Illustrative reading—your inlet and outlet values will vary.
Assumption is not measurement.
Incoming TDS can change with the water source, building storage, internal plumbing, temperature and season. The same purifier can therefore receive very different water from one home to another.
A visible performance trend.
A consistently lower RO reading shows that the membrane is still reducing the overall dissolved load. A sharp or lasting change gives you a reason to check the source water, filter status and appliance—instead of waiting for taste to change.
One glance. A useful daily check. TDS does not identify PFAS, arsenic, microorganisms or any individual contaminant, so it is not a laboratory report. What it does provide is something most filters never show: immediate evidence that dissolved-solids reduction is happening.
Frequently asked questions
HydroForm+ FAQs.
Practical answers about plumbing, temperatures, filters, finishes, service and warranty.
01Does HydroForm+ need plumbing?
+
Yes. HydroForm+ is a connected direct-flow appliance. It needs a suitable cold-water inlet, an RO reject-water route to the drain, a nearby power point and enough clearance for operation and servicing. Countertop describes where it sits; it does not mean manual refill or plug-in-only installation.
02Is HydroForm+ really tankless?
+
HydroForm+ connects directly to the water line, so there is no source tank to refill. Small precision chambers help stabilise temperature inside the hybrid instant-flow system.
03Can I prepare infant formula at the 45°C preset?
+
Do not rely on the name of a preset alone. Follow current health guidance for preparation, handling and required water temperature, and verify actual outlet conditions. HydroForm+ provides selectable water temperatures; it does not replace food-safety guidance.
04What do the Carbon Black and Stellar White options change?
+
Only the finish changes; both colours share the same features and specifications. Ask the Malaysia team if you would like to arrange an in-person demonstration before choosing.
05How often are the HydroForm+ filters replaced?
+
The PAC cartridge has a reference capacity of 2,100 L and the RO + ACF cartridge 3,000 L. The appliance tracks both filters separately; follow its prompt and the written Malaysia service plan because actual life depends on source water and use.
06What does HydroForm+ show about filter performance?
+
The touch interface includes a live TDS reading, separate filter-life percentages and rinse controls, so current performance and the next replacement stay visible. TDS is a trend reading, not a test for every possible contaminant.
07Why use RO with treated Malaysian water?
+
A household may choose point-of-use RO for dissolved matter, taste preferences or uncertainty after public treatment, such as private storage tanks and internal plumbing. Check the local operator, building system and exact tap rather than relying on fear or a blanket national claim.
08Does HydroForm+ make sparkling water?
+
No. It dispenses hot, cold and ambient water. HydroSpark+ adds sparkling water and offers either a refillable source-tank mode or a connected setup, but it costs more and is physically deeper.
09What warranty does HydroForm+ have in Malaysia?
+
HydroForm+ includes a 12-month standard warranty plus a 12-month extended warranty for manufacturing defects under normal household use. Consumables and other exclusions in the Malaysia warranty policy are not covered.
Related guides
Learn more about water purifiers.
Compare installation, reverse osmosis and temperature dispensing before committing to a connected countertop purifier.
HydroForm+
Ready for hot, cold and ambient RO water?
Choose Carbon Black or Stellar White, review the current Malaysia price and add the purifier to your cart.
