Description
Features & benefits
Sparkling water without the extra machine.
HydroSpark+ handles sparkling, cold, hot and ambient water in one place, with reverse-osmosis filtration behind every mode.
Sparkling water without a second appliance.
The same machine provides sparkling, cold, ambient or hot water, with serving volume and fizz level on one control.
Every water mode is filtered through RO.
Sediment, carbon, RO and post-carbon stages prepare the water before dispensing. Sparkling water is carbonated after filtration.
Turn, press and pour.
One turn-and-press control handles water type, serving volume and fizz. The current choice stays visible on the colour display.
Sparkling water at home
Stop buying fizz by the case.
For households that buy sparkling water regularly, HydroSpark+ makes it by the glass from the same RO purifier used for cold, ambient and hot water.
The 0.6 L CO₂ cylinder can make up to 100 × 330 ml servings. Actual yield varies with fizz strength, water temperature, serving size and use.
Make sparkling water when you want it instead of repeatedly buying, storing and hauling bottles or cans.
Choose the all-in-one route when sparkling, chilled, ambient and hot water are all regular household needs.
See it working · HydroSpark+
See it working. Know when it needs attention.
The interface provides the current TDS reading and a reminder when the four-in-one filter is due. Use these as performance and maintenance information, not as a standalone safety test.
Better-tasting water in every mode.
Sediment, carbon, reverse osmosis and post-carbon work in sequence before still or sparkling water is dispensed.
Check your RO reading.
Open the settings interface to see the current TDS value and use trends alongside normal machine performance and scheduled care.
Know when to change the filter.
HydroSpark+ tracks filter life and tells you when the four-in-one cartridge is due.
A clean result across bacteria, toxic metals and pesticides.
SGS Malaysia tested water from HydroSpark+ (VS10) across three important contaminant groups. Every reported target came back non-detect: total coliforms and E. coli; arsenic, lead and mercury; and the full listed pesticide panel. This goes well beyond a taste check or TDS reading—it is independent laboratory evidence covering microbiological and chemical water quality.
1 SGS Malaysia test report HNSA/260580372-AH86294, reported 7 May 2026. Results apply to the HydroSpark+ (VS10) sample submitted for analysis. “Non-detect” means below each test method’s stated reporting limit.
Official product gallery
See HydroSpark+ from every side.
Compare Arctic White and Graphite Grey, the front and side profiles, and the display, knob and two-outlet dispense area.
Twist · choose · press
Choose your water dispensing mode with a turn of the knob.
The HydroSpark’s user interface is extremely intuitive. Turn the knob to see the dispensing modes on the screen. Press to confirm the choice shown.
Turn the knob to choose
A softer sparkle with fewer bubbles and a gentler finish.
Swipe left or rightPress and hold, then turn for volume
Water supply
Choose refill-tank or connected mode.
Tank mode uses removable source and reject-water tanks. Connected mode uses a suitable fixed inlet and drain route. Compare the daily work and site needs before choosing.
Mode 01 · No fixed water tubing
5 L refill tank
Remove and refill the source tank when prompted, then empty the collected reject water as directed. Choose this mode when fixed inlet and drain tubing are not possible and manual refilling suits the household.
Mode 02 · Fixed inlet and drain
Connected pipe-in mode
Inlet and drain tubing provide automatic source-water feed. Installation depends on a suitable route, pressure, power, ventilation and future service access.
Will it fit?
Measure the counter, not just the machine.
The body measures 220 × 508 × 436 mm and weighs 21.7 kg. Allow room for dispensing, ventilation, tank or tubing access and filter replacement.
- Weight
- 21.7 kg · use a stable, level counter.
- Behind
- Keep power and any tubing serviceable.
- In front
- Keep the controls, outlets and glass area clear.
- Above
- Leave room to twist and lift the filter through the top panel.
Filtration & consumables
One filter cartridge and a separate CO₂ supply.
The composite cartridge contains four treatment stages. CO₂ use varies with fizz strength, water temperature, serving size and household use.
PP sediment
First-stage particle pre-filtration.
Pre-carbon
Activated-carbon pre-treatment for chlorine-related taste and smell.
RO membrane
Reverse-osmosis membrane stage at the manufacturer’s nominal 0.0001 µm scale.
Post-carbon
Final activated-carbon taste-refinement stage.
Four-in-one filter
Replace at the appliance prompt, 4,000 L or 24 months, whichever comes first. Request the current Malaysia replacement quote.
0.6 L CO₂ cylinder
Published maximum of 100 × 330 ml servings under suitable conditions. Request current cylinder, exchange and postcode details.
Controls & internals
Inside HydroSpark+.
See how the appliance filters, carbonates and dispenses water, and how the filter, CO₂ cylinder and water supply are reached for normal ownership.
Four stages, one cartridge
PP sediment, pre-carbon, RO and post-carbon are combined in one replaceable assembly.
Separate CO₂ supply
The food-grade cylinder is changed separately from the water filter.
Two dispense outlets
Sparkling and cold use one outlet; ambient and hot use the other.
Your choice stays visible
The 4.3-inch display shows the selected water, fizz and serving volume.
Heating, chilling and fizz
Four modes require more internal hardware and depth than a basic dispenser.
Top filter access
Leave enough space to twist and lift the cartridge out through the top.
Tank or connected
Refill and empty the tanks manually, or use a compatible fixed inlet and drain.
German Design Award 2026
HydroSpark+ was recognised for its product design in the 2026 awards.
Specifications
HydroSpark+ specifications.
Review the water modes, capacities, dimensions, power, connections, finish options and Malaysia warranty before purchase.
| Product model | VS-10 |
|---|---|
| Water modes | Sparkling · cold · ambient · hot |
| Filter stages | PP sediment · pre-carbon · RO · post-carbon |
| Nominal RO scale | 0.0001 µm · manufacturer specification |
| Water monitoring | Single TDS reading in settings |
| Rated purification capacity | 4,000 L · manufacturer specification |
| Purification flow | 0.52 L/min |
| Source / reject tanks | 5 L source · 1 L reject-water tank |
| Ready cold capacity | 2 L |
| Cooling output | 2.4 L/h at ≤4°C test condition |
| Heating output | 18 L/h at ≥90°C test condition |
| Sparkling concentration | 6 g/L at 4°C test condition |
| Water supply | Refill tank or connected inlet and drain |
| CO₂ cylinder | 0.6 L |
| Display | 4.3-inch TFT colour screen |
| Dimensions (W × D × H) | 220 × 508 × 436 mm |
| Net / gross weight | 21.7 kg / 25.5 kg |
| Package dimensions | 625 × 355 × 560 mm |
| External material | ABS + metal |
| Colours | Arctic White · Graphite Grey |
| Power | 220–240 V · 50 Hz |
| Connected pressure | 0.4–0.8 MPa |
| Filter replacement | Device prompt · 4,000 L / 24 months, whichever comes first |
| Malaysia warranty | 12 months standard + 12 months extended; exclusions and assessment apply |
Compare alternatives
Sparkling maker, hot-and-cold purifier or HydroSpark+.
Choose by the complete job, measured space, water source, local CO₂ route, filters, installation and service—not by the headline machine price alone.
Choose it if carbonation is the whole job.
Lower cost and less depth; you supply the water and use a separate appliance for purification, heating or cooling.
Compare sparkling makers →Choose it when hot, cold and ambient are enough.
A slim connected RO purifier without sparkling mode or a CO₂ supply.
View HydroForm+ →Choose it for four water modes together.
Sparkling, cold, ambient and hot RO water, with a refill tank or compatible connected installation.
Choose HydroSpark+ ↑Visible RO performance
Why every Velta purifier includes TDS monitoring.
Is your water filter working right now? Most families can hear the appliance and taste the water, but neither tells them how strongly the RO membrane is reducing dissolved material.
Illustrative reading—your inlet and outlet values will vary.
Assumption is not measurement.
Incoming TDS can change with the water source, building storage, internal plumbing, temperature and season. The same purifier can therefore receive very different water from one home to another.
A visible performance trend.
A consistently lower RO reading shows that the membrane is still reducing the overall dissolved load. A sharp or lasting change gives you a reason to check the source water, filter status and appliance—instead of waiting for taste to change.
One glance. A useful daily check. TDS does not identify PFAS, arsenic, microorganisms or any individual contaminant, so it is not a laboratory report. What it does provide is something most filters never show: immediate evidence that dissolved-solids reduction is happening.
Frequently asked questions
HydroSpark+ FAQs.
Practical answers about installation, tank mode, CO₂, filters, servicing and warranty.
01Does HydroSpark+ need plumbing?
+
Not in tank mode. Fill the removable 5 L source tank and empty the separate reject-water tank. Connected mode uses inlet and drain tubing and needs a suitable site check.
02How does tank mode work day to day?
+
Refill the source-water compartment with compatible feed water when prompted, keep the tank clean and empty reject water as directed. The dedicated tank-mode guide explains the divider and recirculation route.
03How long does one CO₂ cylinder last?
+
The 0.6 L cylinder is rated for up to 100 servings of 330 ml. Stronger fizz, larger servings, water temperature and real use reduce the yield. Ask for the current Malaysia supply and exchange route before purchase.
04How often is the filter changed?
+
Replace at the appliance prompt, 4,000 L or 24 months, whichever comes first. Actual timing depends on feed water and use.
05Where can I see the TDS reading?
+
The current value appears in the settings interface. Use it as a trend and performance reading; TDS does not identify individual contaminants and is not a safety certificate.
06Why use RO with treated Malaysian water?
+
A household may choose point-of-use RO for dissolved matter, taste preferences or uncertainty after public treatment, such as private storage tanks and internal plumbing. Check the local operator, building system and exact tap rather than using fear or a blanket national claim.
07How is this different from a bottle carbonator?
+
A basic carbonator adds CO₂ to water you provide. HydroSpark+ combines RO filtration, sparkling, chilling, ambient and hot dispensing, so it costs more and needs more counter depth, power, filter care and service access.
08How much counter space should I allow?
+
Start with the 220 × 508 mm footprint and 436 mm height, then add working space in front, ventilation and service clearance behind, and enough room above to remove the filter.
09What warranty does HydroSpark+ have in Malaysia?
+
HydroSpark+ includes a 12-month standard warranty plus a 12-month extended warranty for manufacturing defects under normal household use. Consumables and other exclusions in the warranty policy are not covered; inspection and approval apply.
Related guides
Learn more about sparkling water.
Compare the water-supply routine, the simple-carbonator alternative and the current Malaysia category before committing to the all-in-one route.
HydroSpark+
Ready for sparkling water on tap?
Choose Arctic White or Graphite Grey, review the current Malaysia price and add the purifier to your cart.
