Outcome
A dedicated countertop appliance producing room-temperature hydrogen-enriched water from compatible purified source water.
← All installation guides
Hhuhu · Countertop placement
Setting up Hhuhu with purified water.
Plan the 3 L machine beside a compatible purified-water source, with a stable dry surface, safe power and enough rear working room to remove and clean the tank.
- Placement
- Countertop
- Body size
- 223 × 476 × 326 mm
- Source tank
- 3 L removable rear tank
- Output
- Room-temperature hydrogen-enriched water
Setup overview
No plumbing does not mean no planning.
Hhuhu needs compatible source water, power, a stable counter and a repeatable route for carrying, washing, drying and reseating its rear tank.
Primary constraint
The body is 223 mm wide and 476 mm deep. The rear 3 L tank needs additional working space beyond the published machine dimensions.
Source-water route
Place the machine where compatible purified, distilled or RO water can be carried and poured into the rear tank cleanly and safely.
Trade-off
Hhuhu does not purify water or control its temperature. The setup depends on a separate source-water routine and regular tank cleaning.
Six site checks
Plan the whole water-handling routine.
The best position is defined by daily filling and fortnightly cleaning, not only by where the machine body fits.
Identify the water source
Show where compatible purified, distilled or RO water will come from and how it reaches the machine without an unsafe carry or pour.
Measure body and rear access
Allow the 223 × 476 mm footprint plus enough space behind the machine to lift, carry, wash, air-dry and reseat the 3 L tank.
Confirm water compatibility
Use room-temperature purified, distilled or RO water at TDS ≤5. Hhuhu does not replace a purifier and should not receive untreated tap water.
Choose a safe powered surface
Use a level, stable, dry counter with an accessible properly earthed outlet. Keep the plug, cable and machine away from splash and standing water.
Rehearse the tank route
Carry a full 3 L tank between machine, source and sink. Check cabinet doors, overhead cupboards and adjacent appliances do not obstruct the movement.
Plan fortnightly cleaning
Set a route and reminder to remove, clean, rinse and air-dry the tank every two weeks.
Setup record
Document the source and routine.
A short record helps every household member use the same compatible water and cleaning method.
Record placement and source
Keep the home type and general area, counter measurements, model, source-water appliance or supply, power location, setup date and responsible owner.
Agree the position
Where a rental, workplace or shared property requires consent, obtain owner or responsible-person approval for placement and power use. Public image consent is separate.
Verify fill and dispense
Demonstrate tank filling, seating and dispensing; check for leaks; confirm the source-water routine; and record any change needed for safer daily handling.
After setup
Keep source water and cleaning consistent.
Hhuhu has no replacement filter, so reliable operation depends on the approved source and the owner’s tank routine.
Retain machine details
Keep proof of purchase, model and serial details, the setup record and warranty information with the appliance.
Clean the tank every two weeks
Remove, clean, rinse and air-dry the rear tank on schedule. Follow the operating instructions for startup, daily use and any deeper cleaning.
Record display and water condition
If output, taste, odour, display or leakage changes, stop use, photograph the condition and contact Velta Malaysia before dismantling.
Setup and support
Confirm Hhuhu placement and source water with Velta Malaysia.
Share the counter dimensions, a rear-access photograph, the power location and the exact purified-water source you intend to use.